Drilling Fluids

This superior drilling lubricant was recently developed specifically to reduce the coefficient of friction, decrease torque, drag, and bit balling.  Designed for fresh water to high chloride brine systems.   ER-800 has a propensity for metal and reduces the friction between the drill string and wall cake.

Additional advantages:

• Improves drilling performance by reducing torque and drag;
• Minimizes bit balling;
• ER-800 will not adversely affect mud properties;
• Can be used as a pre-treatment additive if high coefficient of friction is anticipated;
• Temperature stability up to  350* F;
• Effective in extended reach, deviated and horizontal well bores;
• Provides corrosion inhibition;
• Cost effective.

A proprietary drilling lubricant designed to reduce torque, drag, and friction in water-based drilling fluids.  D-8501 also helps decrease wear on the drill bit, and lowers the potential for stuck pipe and bit balling.

Additional advantages:

• Helps keep the drill string away from the wellbore during high angle and horizontal drilling by providing a lubricating film to reduce surface-to-surface contact;
• Specially formulated for use in drilling muds, while also providing excellent corrosion inhibition.

This product is a blend of surfactants and dispersants in a non-toxic carrier formulated especially to be low in aromatic content and was specifically designed to reduce friction, torque and drag in drilling operations (especially horizontal) in water based muds.

Additional advantages:

• Concentrated Lubricant, easy to handle and dilute if needed in the field;
•  Reduces Torque and Drag ROP enhancement  Suitable for use with brines and Fresh water muds.

This proprietary product is designed to lubricate oilfield equipment and tools in order to mitigate

issues with torque and allows the end user to use less due to its high active additives in its concentrated form.  D-8504 is compatible with most water based systems and delivers superior lubrication.

Additional advantages:

• Increase ROP;
• 500 F+ Heat Tolerance;
• Innovative technology;
• Drastically reduce torque;
• Reduces hook load.

This proprietary drilling mud lubricant system is designed to reduce torque, drag, and friction in water-based drilling fluids.  D-8505 also helps decrease wear on the drill bit, and lowers the potential for stuck pipe and bit balling. D-8505 is a concentrated product, readily biodegradable.  Lab studies show that D-8505 effectively reduces torque and friction in a variety of fresh and salt water drilling muds including divalent brines.